ECU - Electronic Control Unit

In terminology of VW-group it's any electronic device, which has been carried out some logic function. Sometimes it looks like nonsens - even simple relay can be called ECU.

The coding of Electronic Control Unit used for explain the ECU where it is and what "neighbours" does it have. Very often on modern cars the coding is crossed with adaptation.

Adaptation of the Electronic Control Unit serves to explain to the ECU with whom and how to talk (If we have started to speak allegories) and serves as storehouse of various adjustable parameters. ( part of memory in the Control Unit which can be changed via internal software )

Measured Values Blocks ( MWB ) – various parameters being inbound or calculated. Considering to value of MWB Electronic Control Unit, trying to "control"... Using of MWB allows you ( if you know the basic parameters ) to find out "close to boundary" or temporarily arising ( intermittent, sporadic ) malfunctions and many other useful things at competent use.


J217_8K_34_0B5_1_1108_21_grund.htm
J217_8K_38_06B_1_0407_21_MW_lesen.htm
J217_8K_38_0AW_1_0307_21_MW_lesen.htm
J217_8K_38_0AW_1_0407_21_Pinbelegung.htm
J217_8K_38_0AW_1_0807_21_Bauteile_im_Steuergeraet.htm
J217_8K_38_0B6_1_0407_21_ersetzen.htm
J217_8K_38_0B6_1_0407_21_Pinbelegung.htm
J587_8K_37_____1_0108_21_POSINFO.htm
J587_8K_37_____2_0108_21_TipINFO.htm

J217 - Automatic gearbox control unit

 

A - Wiring harness

B - Multi-function switch

C - Connector

D - Automatic gearbox control unit -J217

 

The automatic gearbox control unit -J217 forms one unit together with the hydraulic control unit (valve body with 7 electric pressure regulating valves) and the multi-function switch -F125 - the so-calledmechatronics unit.

The mechatronics is built into the gearbox oil pan.

The control unit itself cannot be replaced separately, only the complete mechatronics unit.

 

The mechatronics unit is removed and installed according to the Workshop Manual A Repair Group 38.

YZGeneral note

After replacing, the automatic gearbox control unit -J217 must be coded and enabled for the immobilizer. To do so, run the following programs:

a) * * - Servicing immobilizer

b) SVM - Specified/actual comparison.

 

Site news

November 30, 2012
Content update We are starting big site update. We are sorry for bugs and missed content.
We are especially grateful for financial support of our site

User Name
Password
Forgot your password?
Register
Яндекс.Метрика