Sensors

Logic of naming sensors in VW-group is simple it contains "G" (german "Geber") + sensor number. The sensor number is unique. Here you can find fitting location, connectors and pins description, some information about sensors signals.

To our mind, sensors information is reference, so there is only simple search by sensor number.

G

Audi A6 4F (2005- )
Audi TT 8N (1999 -2006)
Audi A3 8P (2003- )
G196_4F_38_ 01J_1_0803_21_Fehlerbeschreibung

Audi A6 4F (2005- ). G196 Описание

18201 Gearbox output speed sender 2 -G196, no signal

 

Fault causes:

I Gearbox output speed sender 2 -G196 defective

I Sender wheel in gearbox defective

 

Fault detection:

I No direction indicator is detected for more than a preset filter time or the gearbox output speed sender -G195 is not OK and the gearbox input speed is above a preset threshold and at the same time the gearbox output speed -G196 is below a preset threshold

 

Remedy:

I Check measured value block 004 in gearbox control unit

I Check sender wheel in gearbox

I Replace gearbox control unit only if all above fault sources can be excluded or have been checked

 

 

18206 Gearbox output speed sender 2 -G196, implausible signal

 

Fault causes:

I Gearbox input speed sender -G195 defective

I Excessive engine speed detected (engine over-revving, sender wheel defective) 

 

Fault detection:

I In the control unit a gearbox output speed was detected above a preset threshold and the gearbox output speed sender -G195 is not OK

 

Remedy:

I Check measured value block 004 in gearbox control unit (compare the two gearbox output speeds and the direction indicator)

I Replace gearbox control unit only if all above fault sources can be excluded or have been checked

 




Site news

November 30, 2012
Content update We are starting big site update. We are sorry for bugs and missed content.
We are especially grateful for financial support of our site

User Name
Password
Forgot your password?
Register
Яндекс.Метрика